Sales, Service & Repair
CHEMBRITE DRY CLEANING CHEMICALS
CHEMBRITE PRODUCT LINE COMPATIBILITY USAGE
WATER, HYDROCARBON, and PERCHLOROETHYLENE – SOLVENT COMPATIBLE
ChemBrite Spray Spotter is water based pre-spotter designed for use in a spray apparatus. It is mixed at the ratio of one part spray spotter to 4 parts water and is applied to and around soiled area and then placed in the drycleaning machine. It can be used to supplement a regular drycleaning cycle by adding one ounce (29 ml) to 5 pounds (2.25 kg) of garments.
ChemBrite Neutral Lubricant is water based synthetic detergent that is non-ionic in nature with a neutral pH (7.0). It is most commonly used on the spotting board with other wet-side spotters to improve wetting and penetration.
ChemDuo is a paint, oil, and grease remover that is solvent based but without an additional oil base. It is used on the spotting board for paint, oil, and grease types of stains as well as a general utility spotter when mixed with equal parts of ChemBrite Neutral Lubricant. It flushes out either on the wet-side or dry-side.
ChemPro is a water based spotter designed for use on the spotting board to remove protein type stains derived from humans or animals (i.e. food, blood stains). It is alkaline in pH.
ChemTan is a water based spotter designed for use on the spotting board to remove tannin type stains which is stains that are derived from plant or vegetable material. It is acidic in pH.
HYDROCARBON & PERCHLOROETHYLENE - SOLVENT COMPATIBLE
ChemBrite P.O.G. is paint, oil, and grease remover that is solvent based and does contain an additional oil base. It is used on the spotting board to remove heavy dry-side stains.
HYDROCARBON & PERCHLOROETHYLENE - SOLVENT COMPATIBLE cont.
ChemDri is a trichloroethylene base volatile dry type spotting chemical for use on the spotting board. It can also be used for touch up work and flushing solvent based spotting agents when using them on the spotting board.
ChemBrite Silk Spotter is the Eway to pre-spot water sensitive fabrics such as silk, satin, rayon, and wools. ChemBrite’s Silk Spotter is an effective leveling agent that conditions garments against color loss, bleeding, and shrinkage following wet-side spotting treatment. No drying is necessary before placing garment in the drycleaning machine. Compatible with perc and hydrocarbon systems.
ChemSize is a hydrocarbon base sizing agent to be used with perchloroethylene or hydrocarbon solvent in a drycleaning machine. It can be used either at the rate of 0.5% (0.5 ml ChemSize to 100 ml of solvent) or it can be injected into the drycleaning machine at the rate of one fluid ounce (29 ml) to each 10 pounds (4.5 kg) of garments.
ChemTex is a premium drycleaning detergent that is designed for either perchloroethylene or hydrocarbon systems. It is anionic in nature and is for use in charge type systems at 1.0% (1 ml Chem Tex to 100 ml of solvent).
ChemKlean is an economical drycleaning detergent that is designed for either perchloroethylene or hydrocarbon systems. It is anionic in nature and is for use in charge type systems at 1.0% (1 ml ChemClean to 100 ml of solvent).
ChemIonic is an advanced E cationic injection detergent for use in perchloroethylene and hydrocarbon systems. Scientifically formulated to render maximum water soluble soil removal, superb static and lint control, as well as excellent anti redeposition performance. Inject at 1-2 ounces per 10 pounds of garments at the start of the cleaning cycle.
ChemBrite Silk Luster is the proven Eway to restore the life back to silks and other fine fabrics. Formulated to eliminate streaks and swales in lightweight garments, it’s the no hassle ready to use scientific way to restore any garment. Simply immerse the garment in Silk Luster for 30 to 60 seconds, then remove and place in the drycleaning machine, extract gently and cool dry.
HYDROCARBON & PERCHLOROETHYLENE - SOLVENT COMPATIBLE cont.
ChemPlete is a scientific blend of detergent, sizing and brighteners for use in perchloroethylene and hydrocarbon systems. The E³ (effective, environmentally friendly and economical) one step method for optimum cleaning in today’s modern machines. Inject at 2 ounces (59ml) per 10 pounds (4.5kg) of garments or run as a 2% charge (2ml ChemPlete per 100ml of solvent) for superior cleaning performance leaving garments with a softer feel, brighter appearance, retexturing quality and enhanced stain removal.
PERCHLOROETHYLENE - SOLVENT COMPATIBLE ONLY
ChemCharge is a premium drycleaning detergent designed for use with perchloroethylene solvent systems only. It is anionic in nature and is formulated to be used at a 1.0% charge (1 ml ChemCharge to 100 ml perchloroethylene).
ChemTerge is a drycleaning detergent designed for use with perchloroethylene solvent systems only. It is anionic in nature and is formulated to be used at a 1.0% charge (1ml ChemTerge to 100 ml perchloroethylene).
WATER – SOLVENT COMPATIBLE ONLY
ChemSoft is a water based detergent for Wetcleaning. It is neutral in pH (7.0) and non-ionic in nature. It is designed for delicate fabrics and fine garments that can safely be wet cleaned. It is normally used at the rate of adding or injecting one ounce (29 ml) of ChemSoft for each 10 pounds (4.5 kg) of garments.
ChemBrite Aqua P.O.G. is Eformulated to lift tough ground in soil and oil based stains from washables garments. Apply directly to stain and wet-clean or wash in usual manner. Aqua P.O.G. is safe on nearly all fabrics and dyes. It is compatible with all wet-side detergents systems and can be added with the laundry detergent to enhance removal of greasy stains.
Chemical comparison chart and sales policy. Freight rate to Arizona is $125.00 per pallet. Pallets cannot exceed 2000 lbs gross weight. Typically you can figure 37 – 6x1 gallon cases per pallet; 7 to 9 – 1x15 gallon drums; or 4 -1x55 gallon drums.